American Dynamics AD5500 Betriebsanleitung PDF herunterladen (Seite 53)

TITLE

This menu programs a 16-character alphanumeric title for each

LOCAL camera for its on-screen display. If a LOCAL camera

input is used for a REMOTE video trunk line input (see Video

Assignments menu, page 4-35), this title identifies a REMOTE

Site Title for the REMOTE on-screen display (page 2-4).

This menu also allows selection of the video loss detection

mode for each LOCAL camera input, if a Video Loss Detector

module is setup for a port (see Port menu, page 4-22).

To select a camera for programming:

1. Place the cursor at the CAMERA number line.

2. Press the ENTER key to cycle through the camera

numbers until the desired number is shown, then press

the NEXT key to move to the VIDEO LOSS or TITLE

line. *

Enter the desired camera number on the keypad and

press the ENTER key to select a specific camera and

move the cursor to the VIDEO LOSS or TITLE line. *

* The cursor moves to the VIDEO LOSS line if a Video Loss

Detector module is set up for a port. If not, the VIDEO

LOSS line is not displayed and the cursor moves to the

TITLE section.

Note: There are two TITLE cursors. One cursor indicates

position in the title; the other indicates the alphanumeric

character to be selected. The NEXT key is used to move

the cursor within the title. The joystick is used to move the

cursor within the selectable characters.

To select the camera video loss mode:

1. Place the cursor at the VIDEO LOSS line. This line is

displayed in the menu only if a Video Loss Detector

module is present and setup to a port (page 4-22).

2. Enter the number of the desired video loss detection

mode on the keypad and press the ENTER key to set the

mode. The mode selections are:

1 = OFF, loss detection disabled

2 = SYNC ONLY, sync loss detection enabled

3 = VIDEO LOW, sync and low picture content video

loss detection enabled

4 = VIDEO MED, sync and medium picture content

video loss detection enabled

5 = VIDEO HIGH, sync and high picture content video

loss detection enabled

Press the ENTER key to cycle through the loss detection

modes. Press the NEXT key to save the selected mode.

The video loss detection mode may also be set by keyboard

actions (page 3-3).

To enter or edit the camera title:

1. Use the NEXT key to place the cursor at the TITLE

lines.

2. To edit an existing title, use the NEXT key to move the

cursor within the title to the character to be changed.

Note: To change an existing character, begin from the

first entry and move through the text until the desired

character location is reached. You cannot backspace

through the title.

3. Use the joystick to move the alphanumerics cursor to the

desired letter, number, or symbol.

4. Press the ENTER key to acknowledge and place the

selected character within the title.

5. Repeat steps 2, 3, and 4 using the joystick and the

ENTER key to “key-in” the desired title.

The PREVIOUS MENU line of the Title menu returns to the

CAMERA menu, page 4-20.

4-21

AD1024 MENU PROGRAMMING

CAMERA

1 PSEUDO

2 TITLE

RETURN MAIN

CAMERA - 0001

VIDEO LOSS - OFF (see * note below)

TITLE - ABCDEFGHIJKLMN

AMERICAN OPQRSTUVWXYZab

DYNAMICS cdefghijklmnop

qrstuvwxyz❚ 012

3456789<>:-./;

PREVIOUS MENU

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

American Dynamics AD5500 Betriebsanleitung Seite 53

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras American Dynamics AD5500