PROGRAMMING ALARM CONTACTS
To select an Alarm Contact for programming:
- Move the cursor to the desired Alarm Contact Number
(ACN) line of the menu (from 1 to1024).
See page 4-2 for cursor movement and paging instructions.
CAM (Camera)
To associate a specific camera with an ACN:
1. Move the cursor to the CAM column and the appropriate
ACN entry.
2. Enter the desired camera number (1 - 1024 for Real
camera numbers or 1 - 9999 for Pseudo numbers). If the
CN field is set to “S”, enter a System Salvo number.
Note: If Pseudo numbers are used, CAM number
switches between Pseudo numbers when N, Y, or W
is selected and Real numbers when S is selected for
the CN field.
3. Press the ENTER key.
Example: To associate ACN 0007 to callup camera 17.
ALARM CONTACT SETUP
ACN CAM DWL PRE AUX CN
0001 0001 02 00 0 - N
0002 0002 02 00 0 - N
0003 0003 02 00 0 - N
0004 0004 02 00 0 - N
0005 0005 02 00 0 - N
0006 0006 02 00 0 - N
0007 0017 02 00 0 - N
0008 0008 02 00 0 - N
.
.
0016 0016 02 00 0 - N
PREVIOUS MENU
DWL (Dwell Time )
To set a dwell time for the camera:
1. Move the cursor to the DWL column and desired ACN.
2. Enter the desired dwell time (from 1 to 60) in seconds.
If 61 is entered, the camera Holds at this tour entry.
3. Press the ENTER key.
Example: To set camera 17 (ACN0007) with a dwell time of
30 seconds.
ALARM CONTACT SETUP
ACN CAM DWL PRE AUX CN
0001 0001 02 00 0 - N
0002 0002 02 00 0 - N
0003 0003 02 00 0 - N
0004 0004 02 00 0 - N
0005 0005 02 00 0 - N
0006 0006 02 00 0 - N
0007 0017 30 00 0 - N
0008 0008 02 00 0 - N
.
.
0016 0016 02 00 0 - N
PREVIOUS MENU
If presets, auxiliary actions, alarm titles, or salvo (CN) are not
required, repeat the preceding CAMERA and DWELL TIME
instructions for as many alarm contact entries as desired.
For preset, auxiliaries, or connect next programming, refer to
the following pages.
4-13
AD1024 MENU PROGRAMMING
Kommentare zu diesen Handbüchern