American Dynamics AD5500 Betriebsanleitung PDF herunterladen (Seite 20)

REMOTE Video Selection

In AD1024 Systems, REMOTE Video Selection is available

only at LOCAL sites which have video trunk inputs connected

to camera input connectors (defined via the Satellite Video

Assignment menu, page 4-35).

REMOTE AD1024 video control functions are accessed from

a LOCAL keyboard by placing one of the LOCAL system

monitors under the control of the keyboard (“Calling” a

monitor to a keyboard), then calling a REMOTE Site and

REMOTE cameras to that monitor.

Note: REMOTE Site video selection and control functions

can be accessed from an AD2088 keyboard or from the

AD5400 or AD5500 Excalibur system only.

To Call a LOCAL Monitor to a Keyboard:

1. Enter the number of the desired LOCAL monitor.

2. Press the keyboard MONITOR button. The number of

the LOCAL MONITOR under control of the keyboard is

shown in the keyboard MONITOR display.

To Call a REMOTE Site and Camera to a LOCAL Monitor:

1. Enter the Site Number of the desired REMOTE Site.

2. Press the keyboard SITE button.

3. Enter the number of the desired REMOTE camera.

4. Press the keyboard CAMERA button. The Site Number

of the REMOTE SITE selected is shown in the keyboard

STATUS display, and the number of the REMOTE

CAMERA called to the MONITOR under control is

shown in the keyboard CAMERA display.

Notes: If eight users are concurrently performing video

control functions with the selected REMOTE Site,

the RS-232 link does not allow a ninth user and the

message “COM FUL” is displayed in the on-screen

Remote Site Status line (see Figure 2-2).

If all video trunk lines from the selected REMOTE

Site are active and cannot switch to the requested

camera, the message “BUSY” is displayed in the on-

screen Remote Site Status line (see Figure 2-2).

The selected REMOTE camera video is now switched by the

AD1024 system to display on the monitor under control of

the keyboard.

After a REMOTE camera is called to the LOCAL monitor, any

camera at the selected REMOTE Site may be called to the

same monitor by repeating steps 3 and 4 above. Any other

REMOTE Site in the satellite network may be called to the

same monitor by repeating steps 1 through 4 above.

When a REMOTE camera is called to a monitor, the picture

includes a REMOTE On-Screen display, as in Figure 2-2.

The Remote Site Status at the top shows the Site Number

of the Site called, or a message if the remote function

cannot be completed (see Notes in preceding steps). The

Remote Site Title is blank until a title is entered for the

video trunk input (via the Camera Title menu, page 4-21).

The Local Date and Local Time, are the same items as in

the LOCAL on-screen display, page 2-3.

The lower two lines display the REMOTE camera status.

These are similar to the LOCAL on-screen display, page 2-

3, except that the information is the REMOTE Site camera,

status, date, and time.

Use the Monitor Display Arrangement function, page 3-3, to

change the contents of the REMOTE camera status display

(bottom lines). Use the MONITOR menu, page 4-18, to

control specific items of the REMOTE camera status.

The on-screen display position and brightness on each LOCAL

monitor may be adjusted using controls on the Video Output

Module of the AD1024 Switching Bay. Refer to the AD1024

Switching Bay Installation manual for these adjustments.

To Disconnect the Keyboard from the REMOTE Site:

1. Press the F1 button.

2. Press the SITE button. Pressing the SITE button with no

Site Number entered clears the keyboard SITE display.

3. Call a LOCAL camera to this monitor (as on page 2-3)

to transfer control of this keyboard to the LOCAL Site.

Note: The F1 button releases control of the video trunk

currently under control of a keyboard. If F1 is pressed only,

the video trunk remains connected to that keyboard until

another keyboard calls a REMOTE site, at which time the

released trunk may be switched to the calling keyboard.

2-4

KEYBOARD CONTROL AD1024

12-15-94

10:27:53

Remote Video Status Line

Remote

Camera

Number

Remote

Date

Remote

Time

Remote

Camera

Title

0001

HOLD

AMERICAN

DYNAMICS

12-15-94

11:27:53

SITE

BUSY

LOCTN B

BLDNG 2

Remote

Site Status

Local

Date

Local

Time

Remote

Site Title

Figure 2-2 - REMOTE On-Screen Display

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

American Dynamics AD5500 Betriebsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras American Dynamics AD5500