System Reset
Following initial AD1650B system installation or a major re-
configuration of the switching system, it may be necessary to
clear all programmed information from the AD1650B, and
reset the system to factory defaults.
User-programmed data is stored in memory and is battery-
backed for a minimum of five years. The data stored includes
date/time, input identification, system tours, system salvos,
event timers, port configurations, system partitioning, and
alarm programming information. System Reset clears this
stored information from the AD1650B.
CAUTION - THE FOLLOWING COMMANDS ERASE
ALL USER ENTERED DATA.
To clear and reset all AD1650B programming:
1. Turn the keyswitch on the keyboard to the PROG position.
Note: System Reset is accessible from AD1678CM or
AD2078 keyboards only.
2. Enter the following keyboard F2 code combination:
“55 F2” (Enter the number 55, then press the F2 key.)
3. Within three seconds, enter the following keyboard F2 code
combination:
“99 F2” (Enter the number 99, then press the F2 key.)
Note: A built-in safety feature requires entering the “99 F2”
command within three seconds of the “55 F2” command.
If “99 F2” is not entered within the required three seconds,
the system will not clear and reset.
When this combination of keys is entered, the AD1650B
system clears and resets all user programmed functions (Tours,
Salvos, Alarm Programming, Event Timers, etc.). System
Reset resets the AD1650B programmed information to the
factory default settings.
See Appendix, page A-2, for a list of the default settings.
Operating System Software Verification
When calling American Dynamics for assistance, the revision
level of the AD1650B software may require verification.
To verify the AD1650B operating system software:
1. Turn the keyswitch on the keyboard to the PROG position.
2. Enter the following keyboard F2 code combinations:
“70 F2” (Enter the number 70, then press the F2 key.)
Note: Operating System Software Verification is accessible
from AD1678CM or AD2078 keyboards only.
In response, a 5-digit code, “UFaaa”, is shown in the Status
Line of the on-screen display (Figure 2-1, page 2-3). The last
digit of this display code is a number which identifies the
revision level of the AD1650B operating system software.
1-3
AD1650B SYSTEM OPERATION
IF YOU ENCOUNTER ANY PROBLEMS
OPERATING THIS UNIT, OR NEED ASSISTANCE,
CALL OUR TECHNICAL SUPPORT CENTER:
within the United States: 1-800-442-2225
outside the United States: (914) 624-7640
(26 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern