NON-MENU PROGRAMMING
The following non-menu setup programming functions are
accessible from AD1678CM or AD2078 keyboards only.
NOTE: The keyswitch must be in the Program (PROG)
position for the non-menu programming functions.
System Reset
It may be necessary to clear all programmed information from
the AD1650B, and reset the system to factory defaults.
CAUTION - THE FOLLOWING COMMANDS ERASE
ALL USER ENTERED DATA.
To clear and reset all AD1650B programming:
1. Turn the keyswitch to PROG position.
2. Enter the following keyboard F2 code combinations:
“55 F2” (Enter the number 55, then press the F2 key.)
“99 F2” (Enter the number 99, then press the F2 key.)
There is a 3-second period after the “55 F2” command has
been entered in which the “99 F2” command must be entered.
If the “99 F2” is not entered within the 3-second period, the
system does not reset.
When this combination of keys is entered, the AD1650B clears
and resets all user programmed functions (Tours, Salvos,
Alarm Programming, Event Timers, etc.). This action resets
these programmed functions to the factory default settings.
See Appendix, page A-2, for the default settings.
Operating System Software Verification
When calling American Dynamics for assistance, the revision
level of the AD1650B software may require verification.
To verify the AD1650B operating system software:
1. Turn the keyswitch to PROG position.
2. Enter the following keyboard F2 code combinations:
“70 F2” (Enter the number 70, then press the F2 key.)
In response, a 5-digit code, “UFaaa”, is shown in the Status
Line of the on-screen display (Figure 2-1, page 2-3). The last
digit of this display code is a number which identifies the
revision level of the AD1650B operating system software.
Setting the Day of the Week
The day of the week must be set prior to programming the
Event Timers, page 4-10. Day of the week can be set from the
keyboard, or via the Set Time and Date menu, page 4-4.
To set the day of the week from the keyboard:
1. Turn the keyswitch to PROG position.
2. Enter one of the following keyboard F2 code combinations:
“61 F2” Sunday (SUN)
“62 F2” Monday (MON)
“63 F2” Tuesday (TUE)
“64 F2” Wednesday (WED)
“65 F2” Thursday (THR)
“66 F2” Friday (FRI)
“67 F2” Saturday (SAT)
“60 F2” Displays the current day of the week, for three
seconds, in the Status Line.
When a code is entered, the three-digit day code is displayed
for three seconds in the Status Line of the on-screen display.
Setting Date Format
There are three options for the on-screen DATE format. The
default DATE format is: MM-DD-YY. Date format can be set
from the keyboard using F2 key combinations.
T
o set the date format from the keyboard:
1. Turn the keyswitch to PROG position.
2. Enter one of the following keyboard F2 code combinations:
“21 F2” MM-DD-YY
“22 F2” DD-MM-YY
“23 F2” YY-MM-DD
“24 F2” Toggles through the three date formats each time
the code is entered.
Date format, day of the week, and the current time and date
may also be set from the Set Time and Date menu, page 4-4.
3-2
NON-MENU PROGRAMMING AD1650B
(26 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern