PROGRAMMING A SYSTEM TOUR
To select a System Tour for programming:
1. Move the cursor to the TOUR number line of the menu.
2. Enter the desired tour number (from 1 to 64).
3. Press the ACK key.
See page 4-3 for cursor movement instructions.
CAM (Camera)
To add or change a camera in a tour:
1. Move the cursor to the CAM column and desired ENT line.
2. Enter the desired camera number (1 - 128 for Real camera
numbers or 1 - 999 for Pseudo numbers). If the CN field is
set to “S” or “T”, enter a System Salvo or Tour number.
Note: If Pseudo numbers are used, the CAM number switches
between Pseudo numbers when N or Y is selected, and Real
numbers when S or T is selected in the CN field.
3. Press the ACK key.
To eliminate a camera from a tour, set the dwell time (DWL) in
the next column to zero (00) for the desired entry.
DWL (Dwell Time)
To set a dwell time for a camera in a tour:
1. Move the cursor to the DWL column and desired ENT line.
2. Enter the desired dwell time (from 1 to 60) in seconds.
* If 61 is entered, the camera will Hold at this tour entry.
* If 00 is entered, this entry is not called in the tour.
3. Press the ACK key.
CAM and DWL Example: Set tour entry 5 to call camera
100, for a dwell time of 5 seconds; set tour entry 6 to call
System Salvo 24 for 20 seconds
SET SYSTEM TOURS
TOUR - 01
ENT CAM DWL PRE AUX CN
01 001 02 00 0 - N
02 002 02 00 0 - N
03 003 02 00 0 - N
04 004 02 00 0 - N
05 100 05 00 0 - N
06 024 20 00 0 - S
07 007 02 00 0 - N
08 008 02 00 0 - N
PREVIOUS MENU
If preset scenes, auxiliary actions, or connect next actions are
not required, repeat the preceding CAMERA and DWELL
TIME instructions for as many tour entries as desired.
PRE (Preset)
If a camera preset scene is desired for a tour entry:
1. Move the cursor to the PRE column for the desired tour
entry line.
2. Enter the desired preset number (from 1 to 72). Zero (0)
represents no preset call for this entry. If the CN field is set
to “S” or “T”, do not enter a preset number.
3. Press the ACK key.
AUX (Auxiliary)
If an auxiliary action is desired for a tour entry:
1. Move the cursor to the AUX column for the desired tour
entry line.
2. Press the ACK key to cycle through the AUX options.
Press the NEXT key to accept the displayed selection.
or
Enter one of the following numbers and press the ACK key.
The selection is displayed in the AUX column.
1 = 1 ON 5 = 1 OFF
2 = 2 ON 6 = 2 OFF
3 = 3 ON 7 = 3 OFF
4 = 4 ON 8 = 0 - (no action)
If the CN field is set to “S” or “T”, do not enter an auxiliary
action selection.
PRE and AUX Examples: At tour entries 1 and 2, call preset
scenes and activate auxiliaries 1 and 2; at tour entries 4 and
5 call preset scenes and turn off both auxiliaries.
SET SYSTEM TOURS
TOUR - 01
ENT CAM DWL PRE AUX CN
01 001 02 01 1 ON N
02 002 02 02 2 ON N
03 003 02 00 0 - N
04 004 02 03 1 OFF N
05 100 05 05 2 OFF N
06 024 20 00 0 - S
07 007 02 00 0 - N
08 008 02 00 0 - N
PREVIOUS MENU
4-6
MENU PROGRAMMING AD1650B
(26 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern