American Dynamics RAS918LSP Spezifikationen PDF herunterladen (Seite 16)

SPEEDDOME ULTRA VII EIS DAY/NIGHT CAMERA DOME 8200-0184-14, REV. A

INSTALLATION AND SERVICE GUIDE

16 of 37

Manchester: After approximately 20 seconds, the three LEDs do the following:

Red Green Yellow Possible Cause

Blinking

Steady,

Blinking, then

Steady

Steady, then Off

White (pin1) and black (pin 2) correctly wired.

When the network has been detected.

When data for this dome has been received. Thereafter,

the yellow LED will flicker when data is sent to this dome.

Blinking

Steady, then

Blinking

Steady

White (pin 1) or white and black (pin 2) wires not connected,

or white and black wires shorted.

RS-422: Set the domes address switches to 900 test mode, then apply power.

After approximately 20 seconds, the three LEDs do the following:

Red Green Yellow

Control

Possible Cause

Mostly Off,

Blinking On

Mostly Off,

Blinking On

Rapidly Blinking Yes RX+ (pin 6) and RX– (pin 7) correctly wired.

Mostly Off,

Blinking On

Mostly Off,

Blinking On

Rapidly Blinking No Wire to RX+ (pin 6) not connected.

Mostly On,

Blinking Off

Mostly On,

Blinking Off

Rapidly Blinking No Wires to RX+ (pin 6) and RX– (pin 7) reversed.

Off On

Alternating Off and On

Every 60 Sec.

Wire to RX– (pin 7) not connected.

Wires to RX+ or RX– not connected or shorted

together.

Wires to RX+ and/or RX– shorted to ac ground.

When not in address 900 test mode.

When done testing, reset the address switches back to the camera address.

SensorNet: After approximately 20 seconds, the three LEDs do the following:

Red Green Yellow Control Possible Cause

Blinking

Steady, then

Rapidly

Blinking

Steady, then Off

Yes Pins 1 and 2 correctly wired.

When data for this dome is received.

Thereafter, the yellow LED will flicker when data

is sent to this dome.

Blinking

Steady, then

Rapidly

Blinking

Steady, then Off

No Wires to pin 1 and/or pin 2 shorted to ac ground.

When data for this dome is received.

Blinking

Steady, then

Rapidly

Blinking

Steady No Wire to pin 2 not connected.

Blinking

Steady, then

Blinking

Steady No

Wires to pins 1 and 2 shorted together.

Wire to pin 1 not connected or both wires to pins

1 and 2 not connected.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare

American Dynamics RAS918LSP Spezifikationen Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras American Dynamics RAS918LSP