American-dynamics AD2089 Bedienungsanleitung PDF herunterladen (Seite 28)

Using the AD2089 in Operate Mode

20 AD2089 Operator’s Manual

3 Press the PATRN key (P-1, P-2, or P-3 appear in the ENTER display) and then press the RUN

key. The camera will sequence through the pattern movements once.

To repeat a pattern:

1 Follow the procedure described immediately above to run a pattern.

2 After pressing the PATRN key (P-1, P-2, or P-3 appear in the ENTER display), press the ACK

key to repeat the pattern.

To hold a pattern:

1 Follow the procedure to run a pattern.

2 After pressing the PATRN key, press the HOLD key to bring the camera or dome to the starting

point of the pattern and hold there.

Running a Macro

A macro is a sequence of keyboard inputs of up to 21 keystrokes, that is executed by typing the

macro’s numeric identifier (up to four digits), and pressing the macro’s designated key. A macro

can be made up of all Monitor mode inputs, all DVMS mode inputs, or a combination of both.

To run a macro:

1 Type the macro’s numeric identifier.

2 Press the macro key (the macro is executed).

Procedures and examples of macro programming are covered in the following chapter.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Keine Kommentare

American-dynamics AD2089 Bedienungsanleitung Seite 28