American Dynamics ADRL3TRK Series Installationsanleitung PDF herunterladen (Seite 4)

SENSORRAIL IIIE ADRL3TRK SERIES 8200-0593-02, REV. A

INSTALLATION GUIDE

4 of 34

Parts Supplied

Note: The number of parts supplied depends on

the length of the rail.

• Rail section package, which includes:

- 2.5m (8.2ft) straight rail sections

- 2.5m (8.2ft) PVC holders

- Stirrups, 1 per rail section

- Jointing plates, 4 per rail section

- Screws for jointing plates.

• Rail accessories package, which includes:

- End covers (2) with attachment hardware

- Springs for service stop blocks (2)

- Stop screws (2)

- Nylon service blocks for mechanical stops

and trolley retrieval (2)

- Optical stop strip (1 roll)

• Light reduction kit

- 30cm (11.8in) section w/top hat cover (2).

• Trolley package

- Camera trolley with 2.4GHz RF transceiver,

CPU, SpeedDome Ultra dome camera, and

motor

- PowerRail 90–240Vac (50/60Hz) to 27Vdc

power supply with RS-422 to RS-232

connections, 2.4GHz receiver, PAL.

• Cowling package

• Copper tracks package

- Wheels to hold copper tracks

- Support structure for wheels

- Service trolley

- Steering wheel to retrieve copper tracks for

servicing.

Note: The tool used to install copper tracks is

not supplied with the system.

Parts to be Purchased Separately

• M8 threaded rods and related hardware, and

ceiling connection assemblies

• 3.3mm (1/8in) cable (as needed), steel

galvanized 7x19 strands, minimum working load

limit 680kg (1500 lbs)

• 8mm (5/16in) galvanized eyebolts, 317kg

(700 lbs) minimum working load limit

• U-bolt clamps and wire thimbles for 3.3mm

(1/8in) cable

• 9.6mm (3/8in) minimum size diameter jaw & jaw

turnbuckles, 544kg (1200 lbs) break strength,

362kg (800 lbs) minimum working load limit

• SensorNet-to-RS422 code converter for VM16,

VM32 and MegaPower LT video controllers, if

used. The AD1024 matrix switcher requires a

2083 converter.

Tools and Equipment Required

• Proper lift equipment (scissor lift with extended

work platform is recommended)

• Hilti PR-15 rotating laser leveling device

• 60cm (2ft) bubble level

• String line

• Battery-powered drill, ½-inch

• Metric screwdrivers and Allen wrenches

• M13 open wrench

• 0.1–5mm feeler gauge set

• Common hand tools, such hammers, cutters,

and pliers

• Copper track installation/retrieval tool

• Torque wrench

• Soldering iron

• Laptop with AD SensorRail Control application

installed and a serial port or USB-to-serial port

• Protective gloves (surgical or cotton type)

• Protective eyewear

• Plastic card similar to a credit card

• Ruler

• Cleaning pads and tissues (for fingerprint

removal upon completion).

1 2 3 4 5 6 7 8 9 ... 33 34

Kommentare zu diesen Handbüchern

Keine Kommentare