American Dynamics Intellex IP Bedienungsanleitung PDF herunterladen (Seite 5)

Using the VideoEdge IP Encoder with Intellex IP

_______________________________________________________________________

8200-0806-11 B0

Intellex IP CPU Loading

The CPU load on the Intellex IP is determined by all of the configuration settings

but some have more effect than others. Table 2 lists the typical incremental CPU

loading for each of several system settings.

Frames will be

dropped once the

loads exceeds 100%.

Table 2: Incremental CPU load

The greatest CPU load is handling the 240 images per second coming from the

connected encoders. The next highest load is driving the main monitor and

sending images to Network Client. In this scenario it would be possible to receive

240 ips of 4 CIF images, record 120 ips of 4CIF images and either display live on

the main monitor (CPU loading 83%) or display live on Network Client (CPU

loading 83%) but not both (CPU loading 103%). As the CPU load approaches

100% the Intellex IP drops frames being served to the Network Client for live

display and drops frames from recording. Two important things to minimize the

CPU load on the Intellex IP are to 1) configure the encoders to deliver the

minimum live rate necessary for the application, and 2) configure the Intellex IP

with the main monitor disabled if live surveillance is not being done or if live

surveillance is via Network Client. The main monitor can be disabled by enabling

classic security and logging out of the Intellex.

1 2 3 4 5 6

Keine Kommentare

American Dynamics Intellex IP Bedienungsanleitung Seite 5