American Dynamics MegaPower 3200 Installationsanleitung Seite 28
- Seite / 86
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
MEGAPOWER CPU 8200-0421-03, REV. G
ADMINISTRATOR’S GUIDE
26 of 82
If only one MegaPower CPU IP address is specified,
the status of that MegaPower CPU is shown. If no
MPCPU A or B IP address is specified, the status of
the Edit => Preferences default IP address is shown
as MPCPU A.
Click on the Status – Passive Hot Switch Status link
in the Explore menu to begin. The following screen
appears (
Figure 56).
Figure 56. Passive hot switch status screen
The Passive Hot Switch Status screen provides the
following information:
• MPCPU – Shows the names of the MegaPower
CPUs.
• Site # – Site number assigned to the MegaPower
CPUs. The site number is configured in the
System – Options dialog box. Range: 0-30.
• Site Name – Site name assigned to the
MegaPower CPU. The site name is configured in
the System – Options dialog box.
• DHCP Host Name – MegaPower CPU Host
name for DHCP IP communications.
• IP Address – Ethernet communications IP
address.
• MAC Address – MAC Address of the
MegaPower CPU Ethernet interface.
• Selected Status:
− Selected – indicates actively driving the AD
Data Lines and the RS-232 port transmitters.
− Backup – indicates standby MegaPower CPU
is in the dual hot switch system.
• Port Range:
− High 17–32 – MegaPower CPU rear slide
switch is up selecting com ports 17-32 &
ADDL 3-4.
− Low 1–16 – MegaPower CPU rear slide switch
is down selecting com ports 1-16 & ADDL 1-2.
• Firmware Version – Displays the MegaPower
CPU firmware version number.
• Last Selected:
− Yes – MegaPower CPU was switched to
Selected by pushing recessed button on unit.
− No – MegaPower CPU was not the last unit set
to Selected status.
• Mating CPU Port Range:
− High 17–32 – MegaPower CPU rear slide
switch is up selecting com ports 17-32 &
ADDL 3-4.
− Low 1–16 – MegaPower CPU rear slide switch
is down selecting com ports 1-16 & ADDL 1-2.
•
Mating CPU Status:
− Good – Mating MegaPower CPU operational
with heartbeat.
− Bad – Mating MegaPower CPU has faults.
− None – MegaPower CPU ribbon cable
connected to itself.
− Open – MegaPower CPU ribbon cable not
connected.
− Off – Mating MegaPower CPU not
communicating.
• Mating CPU IP Address – Ethernet
communications IP address of a paired unit in hot
switch configuration.
• Alarm Relay:
− Normal – Relay center pin connected to NC
(normally closed) pin.
− Active – Relay center pin connected to NO
(normally open) pin.
Error Log Status
You can view the status of the Error Log by selecting
on the Error Log Status screen. The information is for
reference only and cannot be edited.
Click on the Status – Error Log Status link in the
Explore menu to begin. The following screen
appears.
Figure 57. Error log status screen
- MegaPower 1
- Contents 4
- MegaPower CPU Front Panel 6
- MegaPower System 7
- Compatible System Keyboards 8
- System Features 8
- Administrator Tasks 9
- Operator Tasks 9
- Initializing the System 10
- Ethernet Network Connection 11
- Network DHCP Server 12
- Using a Static IP Address 13
- Firewall Setup 14
- Read Cycle 14
- Installing EASY CPU 15
- ADMINISTRATOR’S GUIDE 16
- Starting EASY CPU 18
- Viewing Configuration File 19
- Properties 19
- Data in CPU 20
- New Configuration File 22
- Adding a User Login 23
- Logging in Users for CPU 24
- Read/Write Access 24
- EASY CPU Main Screen 25
- Overview 25
- Checking the System 26
- Camera Status 27
- Passive Hot Switch Status 27
- Error Log Status 28
- Configuring the System 29
- Setting System Date and Time 30
- Setting Port Configurations 32
- Configuring the Dome/PTZ 32
- Device Direct Connection 32
- Configuring Switching 34
- Creating Tours 36
- Event Timers 37
- Event Timer – Tours 38
- Configuring Alarms 39
- Contact Arming 41
- Creating Alarm Monitor/ 42
- Contact Tables 42
- Defining System 44
- Devices 44
- Adding Camera Definitions 45
- Adding and Deleting Calling 46
- Contacts to Cameras 46
- Associating Salvo Callups to 47
- Cameras 47
- Defining Keyboards 48
- Adding a Range of Monitors 49
- Configuring Keyboard/User 50
- Keyboards and Priorities 50
- Priority Settings 51
- Controlling Access with 52
- Partitions 52
- Editing Camera Definitions 54
- Changing Calling Contacts 54
- Associating Keyboards to 55
- Adding Keyboard Definitions 56
- Editing Keyboard Definitions 56
- Adding Cameras to Keyboards 56
- Monitors 57
- Adding Monitor Access to 58
- Keyboards 58
- Adding Monitors to Keyboards 58
- Satellites 59
- Associating Monitors to 61
- Adding Monitor Definitions 62
- Adding a Range of Cameras 63
- Performing a Ping Test 64
- Declarations 65
- 64 of 82 66
- 65 of 82 67
- LCD Menu Structure 69
- F1 Special Function Keys 71
- F2 Special Function Keys 71
- Tables on page 40 for 73
- Alarm Receipt 75
- Alarm Arming and Response 75
- Alarm Display Indicators 75
- Alarm Display Method 76
- Alarm Queuing Method 76
- Alarm Clearance Method 76
- Single Display, Hold Queuing 78
- Block Display, Hold Queuing 79
- Queuing 79
- Satellite Site Connections 82
- 81 of 82 83
- 82 of 82 84
- 8200-0421-03 G 86
Verwandte Produkte und Handbücher für Prozessoren American Dynamics MegaPower 3200
(38 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.811 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern